RECTANGULAR GAS FIREPIT SPECIFICATIONS:
| Product name | Rectangular Gas Firepit |
|
|
|
|
|
| Model No. |
| |
|
|
|
|
| Rated Heat Output | 40,000 BTU/HR |
|
|
|
|
|
| Fuel |
| |
|
|
|
|
| Gas Supply | 20 lb. |
|
|
|
|
|
| Manifold Pressure | 11 inches water column |
|
|
|
|
|
| Orifice Size (diameter) | 1.96(0~+0.02)mm |
|
|
|
|
|
| Gas Supply Pressure | Maximum 250 PSI |
|
|
|
|
|
|
|
|
|
|
| WARNING | |
|
|
|
|
LP GAS CYLINDER (NOT SUPPLIED WITH THIS FIREPIT)
The LP cylinder is available for purchase at the same location the firepit was purchased.
The LP (Liquid Propane) gas cylinder specifically designed to be used with this firepit must have a 20 lb. (9.1 kg) capacity incorporating a Type 1 cylinder valve and an
•DO NOT connect this firepit to an existing #510 POL cylinder valve with Left Hand threads. The Type 1 valve can be identified with the large external threads on the valve outlet.
•DO NOT connect to a propane cylinder exceeding this capacity.
•DO NOT connect to a cylinder that uses any other type of valve connection device.
CYLINDER SPECIFICATIONS:
When purchasing or exchanging a cylinder for your gas firepit, it must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada,
The cylinder must also be equipped with:
•A
•A Type 1 valve that prevents gas flow until a positive seal is obtained.
•An arrangement for vapor withdrawal.
•A collar to protect the cylinder
•A safety relief device having direct communication with the vapor space of the cylinder.
•A listed
4
