Brinkmann Gas Outdoor Grill owner manual M6 X 12mm bolt

Hose

Heat Shield

Burner Venturi

Side

Burner

Valve

Valve

Nozzle

Step 15

Attach the side burner assembly to the right side of the grill body. Insert two M6 x 12mm bolts halfway into both right legs. Place side burner assembly over bolts and slide toward front of grill, then tighten securely. Fasten side burner front panel to grill body with one

M6 X 12mm bolt.

Step 16

Attach the hose heat shield

to the right cart frame using two #8 self-tapping screws.

Step 17

Remove two screws and washers from the side burner valve. Insert the side burner valve assembly through the hole in the side burner front panel, then firmly seat the valve nozzle into the burner venturi. Hold in place while you perform Step 21.

Warning:

Never use your grill without leak testing all gas connections and hoses. See the section on “Leak Testing” in this manual for proper procedures.

28