Manuals / Brinkmann / Outdoor Cooking / Gas Grill

Brinkmann ProSeries 4435 owner manual Step

Models: ProSeries 4435

1 36

Download 36 pages 27.46 Kb

Page 30

Image 30

Fasten side table front panel to grill body with one M4 X 10mm bolt.

Step 16

Attach side table front panel to side table with three M6 X 15mm bolts with star washers.

Step 17

Attach side burner front panel to side burner with three M6 X 15 bolts with star washers.

Step 18

Attach side table to left side of grill body. Insert four M6 X15mm bolts halfway into the left side grill body panel. Place table over bolts and slide down, then tighten securely.

Fasten side table front panel to grill body with one M4 X 10mm bolt.

Page 30

Image 30

Brinkmann ProSeries 4435 owner manual Step, Fasten side table front panel to grill body with one M4 X 10mm bolt

Contents

NOTICE TO INSTALLER Gas Outdoor GrillASSEMBLY AND OPERATING INSTRUCTIONS OWNER’S MANUAL / OWNER’S MANUALDANGER IMPORTANT SAFETYFOR YOUR SAFETY FOR YOUR SAFETYTABLE OF CONTENTS GENERAL WARNINGS USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR GAS GRILLSAVE THIS MANUAL FOR FUTURE REFERENCE INSTALLATION INFORMATION CYLINDER SPECIFICATIONS DANGERFILLING THE LP GAS CYLINDER INSTALLING THE LP GAS CYLINDER ONTO THE GRILLREGULATOR RESETTING PROCEDURE HOSE AND REGULATORCONNECTING HOSE AND REGULATOR TO AN LP GAS CYLINDER CONNECTING HOSE AND REGULATORCHECKING FOR LEAKS LEAK TESTINGWHEN TO PERFORM A LEAK TEST DANGERPRE-START CHECK LIST PRE-START CHECK LIST7. Turn off gas supply at cylinder valve LIGHTING INSTRUCTIONS LIGHTING THE MAIN BURNERSMATCH LIGHTING THE MAIN BURNERS LIGHTING THE ROTISSERIE BURNER MATCH LIGHTING THE ROTISSERIE BURNERLIGHTING THE SIDE BURNER MATCH LIGHTING THE SIDE BURNER TURNING OFF THE GRILLTo turn off the cylinder valve, turn knob clockwise until it stops PREHEATING THE GRILL OPERATING THE GRILLBREAKING IN YOUR GRILL CONTROLLING FLARE-UPSUSING OTHER FEATURES OF THE GRILL ROTISSERIE COOKINGTHE SIDE BURNER GRILLING TO PROPER TEMPERATURE PROPER CARE & MAINTENANCECLEANLINESS GRILL COOKING TIPSCLEANING AND MAINTENANCE BURNER ASSEMBLY/MAINTENANCEPROPER BURNER OPERATION TRANSPORTING AND STORAGE COOKING GRILLSHEAT DISTRIBUTION PLATES BEFORE STORING YOUR GRILLYellow Flames at burner Flame blows out on LOW TROUBLE SHOOTINGProblem Burner will not light Fire at control knob Burner does not get hot enough Grill is Too HotFREQUENTLY ASKED QUESTIONS Question Why does my grill not light properly?RESETTING THE REGULATOR FLOW LIMITING DEVICE FREQUENTLY ASKED QUESTIONS Question Can I convert my grill from propane gas to natural gas?WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN ASSEMBLING THIS UNIT ASSEMBLY INSTRUCTIONSREAD ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY PARTS LIST2324 FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE ATProof of purchase will be required 3839PARTS BAG CONTENTS Step StepStep Door Hinge Pin Holes Locking Caster Hex Nut WrenchStep Tank Tray AssemblyInstall door bracket using four StepGrill Body Assembly StepStep Step Attach left side door bracket to left front cart panel using twoStep StepStep Attach the door handles using two M4 X 40mm boltsStep StepStep StepStep Fasten side table front panel to grill body with one M4 X 10mm boltStep StepM4 X 10mm bolt procedures without leak testing allon Leak Testing in this StepStep StepStep StepStep StepStep StepProSeries 4435 Assembled WARRANTY