Note: With the help of a friend, turn the cart to its upright position.
Step 4
Place tank tray assembly over vent holes in bottom cart panel and secure using four M6 X 15mm bolts. Tank tray should slide in and out of cart freely.
Step 5
Install door bracket using four M6 X 50mm bolts and two
M6 X15mm bolts. Make sure the door stop is set toward back of cart. (Hand tighten only at this point.)
Tank Tray Assembly
Center
Cylinder Clamp
Step 6
Attach the grease cup bracket onto the back panel by inserting the three tabs into the slots on the back cart panel.
25
