| Burner Venturi | Step 15 |
| |
| Remove two M4 X 10mm bolts and | |||
|
| |||
|
| spring washers from the side | ||
|
| burner valve. Insert the side burner | ||
Side |
| valve stem through the hole in the | ||
| side burner table base, then firmly | |||
Burner |
| |||
| seat the valve nozzle into the | |||
Valve |
| |||
Valve | burner venturi. Hold in place while | |||
| ||||
| Nozzle | you perform Step 15. | ||
|
| Warning: | Never use your grill | |
|
|
| without leak testing | |
|
|
| all gas connections | |
|
|
| and hoses. See the | |
|
|
| section on "Leak | |
|
|
| Testing" in this | |
|
|
| manual for proper | |
|
|
| procedures. | |
|
| Step 16 |
| |
|
| Place the bezel over the valve stem | ||
|
| and position over holes in side | ||
|
| burner base and side burner valve | ||
|
| assembly. Attach with two | ||
|
| M4 X 10mm bolts with spring | ||
|
| washers which come with valve. | ||
|
| Then install the side burner control | ||
|
| knob onto valve stem. | ||
|
| Step 17 |
| |
|
| Attach side burner igniter lead to | ||
|
| the electrode as illustrated. | ||
Side Burner Igniter | Electrode |
|
| |
Lead |
|
| ||
|
|
| ||
|
|
| 28 | |
