842-0010-S_OneBurnerStove.qxd 1/5/05 4:50 PM Page 7

AFTER-USE SAFETY

Always allow the stove to cool completely before handling.

When disconnecting propane cylinder, a small amount of LP gas is released until cylinder is completely removed. Cylinder contains a self-sealing valve.

Always disconnect the propane cylinder from stove when not in use - Replace cap on the propane cylinder.

Store propane cylinder in a well ventilated area away from any heat source or open flame.

Fold legs underneath stove body.

PROPER CARE & MAINTENANCE

Wipe exposed parts of stove with damp cloth. Do not use abrasive materials.

To protect your stove, the unit must be kept clean and covered at all times when not in use.

Only use replacement/accessory parts manufactured by The Brinkmann Corporation. Repairs should be performed by The Brinkmann Corporation. For parts or repairs, contact The Brinkmann Corporation’s Customer Service Department at 1-800-527-0717.

Cover and store stove in a protected area away from children and pets.

After product has been stored and prior to reusing, verify that burner is free from leaves, insects, spider webs, dirt, etc. as these items can obstruct the flow of combustion air.

Prior to each use, visually check the burner flame for proper operation as described on page 5. DO NOT use if burner/flame is not operating properly.

This stove requires an unobstructed airflow to operate correctly.

During use or storage, always keep the stove area clear and free of combustible materials, gasoline and other flammable vapors and liquids.

NOTE: Due to the intense heat from burner, it is normal for discoloration to occur on stove during the first few uses.

6

Page 7
Image 7
Brinkmann SINGLE BURNER PROPANE STOVE owner manual AFTER-USE Safety, Proper Care & Maintenance