Harbor Freight Tools 69039 Door/Back Cover 19, 20 Installation, Assembly Maintenance, and flaps

Door/Back Cover (19, 20) Installation

1.Position the Door Cover (19) near where you want the front of the Portable Garage, and turn it so that the zipper faces the outside of the Portable Garage, and the warning tag faces inside.

2.Disconnect the Rail (3) from the 3‑Way Ridge Connector (5‑1), and place the gap at the

top center of the Door Cover (19) around the Ridge Connector (5‑1), as shown. Note that the

Door Cover’s (19) flaps wrap around the Rafters (2), and the Rope (21) is positioned inside the frame. Reconnect the Rail (3) securely to the 3‑Way Ridge Connector (5‑1).

5-1

SAFETY

	5-1	3		3
5-3	3			3
				3
3			5-2
		3	Place rope	19
			and flaps

inside frame.

zipper

Figure P: Door Cover (19) Installation

3.Repeat step #2 for the 3‑Way Side Connectors A/B (5‑2, 5‑3) so that the Door Cover (19) looks as shown in the illustrations above.

22

Figure Q: Securing Door Cover

4.Use Ratchet Tie-downs (22) to attach the Cover to the Corner Legs (23), see Securing Ratchet Tie-downs (22) on page 10 and Figure Q.

ASSEMBLY

MAINTENANCE

5. Repeat steps #1 – 4 above to install the Back Cover (20) to the other end of the Portable Garage.

Item 69039 For technical questions, please call 1-800-444-3353. Page 11