Harbor Freight Tools 69039 Figure H Stud Installation, Figure I Studs Installed on Both Sides

SAFETY

ASSEMBLY

MAINTENANCE

Stud Installation

1.Have assistants raise one side of the roof assembly.

2.Install the Center Studs (1-1) into the 4-Way Side Connectors (6‑2), and the Corner Studs (1‑2) into the 3‑Way Side Connector A/B (5-2, 5-3) with the Corner Legs (23) facing inward.

Figure H: Stud Installation

3.After all four Studs (1-1, 1-2) are in place, rest that side of the assembly on the ground, and raise the other side.

4.Install four Studs (1-1, 1-2) on the other side of the roof, as explained in step #2, above.

Figure I: Studs Installed on Both Sides

5.Make sure all parts assembled up to this point are firmly joined together. Tap parts together gently with a rubber mallet (sold separately) if needed.

Page 8 For technical questions, please call 1-800-444-3353. Item 69039