Harbor Freight Tools 69039 Roof Frame Assembly, Figure B Roof Assembly Overview, Safety Assembly

Roof Frame Assembly

SAFETY

ASSEMBLY

Note: Much of this products assembly is done using slip fit construction. Make sure all parts seat completely and securely. A rubber mallet (sold separately) can be used to gently tap parts in place to ensure a tight fit.

Figure B: Roof Assembly Overview

1.Assemble ridge using three Rails (3) with 4-Way Ridge Connectors (6‑1) between them, and a 3‑Way Ridge Connector (5-1) on each end.

The Rails connect to the straight ends of the Connectors

and the curved, free ends of the Connectors are angled down, as shown.

Figure C: Ridge Assembly

2. Connect a Rafter (2) to each free end of every Connector (6-1, 5-1), as shown.

MAINTENANCE

Figure D: Rafter Assembly

Page 6 For technical questions, please call 1-800-444-3353. Item 69039