b.If the weather has been cloudy or overcast during the day, the bat- tery will not be charged for operation at night. The light must have direct sunlight every day to fully charge the battery. If the light does not receive enough sunlight one day, it will recharge the next sunny day and resume normal operation.
c.Check the battery on a voltage meter to ensure that battery is charged to a full voltage of
d.Diminishing light or gradual decrease in number of activations indi- cate a dying battery that requires replacement. Replacement battery may be purchased from The Brinkmann Corporation Customer Ser- vice Department by calling
•Loose or burned out bulb. Bulbs can become loose over time. Check and tighten the bulb periodically. If the bulb has burned out, a replacement can be easily installed. Replacement bulbs may be purchased from The Brinkmann Corporation Customer Service Department by calling
•Dirty Solar Panel. A dirty solar panel will not allow the battery to fully charge. This will shorten battery life. Clean regularly with a dampened cloth or paper towel.
If lights come on randomly:
•Aim motion detector head lower.
•Cover areas which may be reflecting signals to motion sensor such as: cooling or heating ducts, reflective surfaces, metal sheds, smooth walls or windows, etc..
•Rotate the detector head right or left a few degrees.
•Mount your motion detector on a firm surface as vibrations can false trigger the unit.
•Aim detector away from busy streets or sidewalks, trees and bushes.
If range is too short or too long:
•Position your motion detector so movement is across detection zone.
•Aim detector upward to increase range or downward to decrease range.
CAUTION: Do not use any other battery size or type. It will damage the unit and void the warranty. Do not attempt to open the detector housing. There are no user serviceable parts inside.
Troubleshooting & Important Information (con- tinued)
NOTE: After installing the main housing and solar panel module, leave the switch in the “OFF” position and charge in full, direct sunlight for THREE FULL DAYS. Then remove the switch label and slide the switch to the “AUTO” position. The light will turn on auto- matically at night when it detects motion.
IMPORTANT: The sealed battery in this product contains lead and must be recycled or disposed of properly. For additional information regarding dispos- al, contact your local county solid waste authority.
8
