Brinkmann Stainless Steel Tier owner manual Changing Batteries, Cleaning, Step

INSTR_822-2510 SS Tier.qxd 12/29/03 4:01 PM Page 5

IMPORTANT: The EPA Certified RBRC® Battery Recycling

Seal on the nickel-cadmium (Ni-Cd) battery contained in our

product indicates The Brinkmann Corporation is voluntarily

participating in an industry program to collect and recycle

these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC® program provides a convenient alternative to placing used

Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. The Brinkmann Corporation’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.

Top Housing

Tabs

Lens

Battery

Compartment Lids

Batteries

Top Housing

Changing Batteries

Step 1

Remove lens from top housing by turning lens clockwise.

Step 2

With top housing upside down (solar panel facing down), push tab on battery compartment lids and remove the lids.

Step 3

Remove batteries. Replace with new Ni-Cd rechargeable batteries.

Step 4

Replace battery compartment lids.

Step 5

Attach the lens by aligning the tabs with the slots in top housing. Turn counter-clockwise to lock in place.

NOTE: These lights utilize L.E.D. (Light Emitting Diode) technology. There are no bulbs to replace.

Cleaning

It is important that the solar panel is kept free of dirt and debris. A dirty solar panel will not allow the batteries to fully charge. This will shorten the life of the batteries and cause the light to malfunction. Clean regularly with a dampened cloth or paper towel.

4