Replace the cover and belly pad | Britax 55 specification

a Lift harness adjuster lever

b Pull both harness straps forward

2Remove the body pillow, unbuckle the harness, and remove the belly pad.

3Lift the back cover, then pull it forward while pulling the buckle through to access the rear-facing belt path.

4Route the vehicle seat belt through the rear-facing belt slots, then buckle. Ensure the vehicle belt is not twisted.

5Push the child seat down while pulling the vehicle belt to remove all slack (see pages 10 – 11).

6Rear-facing installations can be improved by the use of the Versa- Tether (see pages 26 – 29).

7Pull the buckle up through its appropriate slot in the cover.

Britax 55 manual Replace the cover and belly pad