Manuals / Britax / Baby / Carrier

Britax Britix Marathon manual Using the Versa-Tether, Rear-Facing Tether Connector Strap

Models: Britix Marathon

1 21
Download 21 pages 20.05 Kb
Page 14
Image 14

Versa-Tether®

Versa-Tether®

Using the Versa-Tether®

1� Consult your vehicle’s owner’s manual for approved tether-anchorage locations..

2� Locate tether on rear of restraint and remove tether components from pouch..

3� Secure the child restraint by a seat-belt or with the LATCH system..

4� Lift tether release tab; then pull to fully extend tether strap into a "V" shape..

5� Locate the hook on the strap and loosely attach the tether to an anchor point.

•See figure A for forward-facing installation.

•See figures B and C for rear-facing installation.

Rear-facing installation may also require the use of the Tether Connector Strap, as described on page 25..

6� Pull the adjuster strap to remove all slack.

7� Verify there is tension in the tether strap and that child restraint is properly secured. The restraint is stable when it cannot be moved front to back or side to side more than 1 inch (2..5 cm..) at the belt path.

NOTE:

A

B

C

Rear-Facing Tether Connector Strap

WARNING: Only use the tether connector strap for rear-facing tether installation..

Because every vehicle model is different, sometimes you

D

 

 

 

 

 

 

cannot find a location to properly anchor the tether or the

 

 

 

 

 

 

 

 

structural part of the seat is too large for the hook. Use the tether connector strap to assist in creating an anchor point (fig. D).

1� Find a fixed vehicle-seat-belt anchor or vehicle seat leg (that is bolted to the floor) to which the strap can be wrapped around..

2� If you cannot find an acceptable location to create an anchor point, contact the vehicle manufacturer to identify a suitable tether connection point..

3� Loop the strap around the metal anchor..

4� Take the metal D-ring and thread it through the webbing loop on the other end of the strap..

5� Pull the metal D-ring all the way through until the strap is tight around the metal anchor..

6� Use the D-ring as an attachment point for hook on tether strap..

Energy-Absorbing Tether

 

 

 

 

 

WARNING: The energy-absorbing tether has

 

 

 

been designed to indicate when child restraint

 

 

 

has been in a severe crash and replacement of

 

 

 

child restraint is necessary..

 

E

 

 

 

•The rear-facing recline angle of the child restraint should be 30º-45º from ver- tical (not to exceed 45º from vertical) when car is parked on a level surface..

•The rear-facing recline angle can be adjusted by placing a rolled towel or pool noodle in the crease of the vehicle seat, and the restraint can be stabilized by tightening the tether as shown in figure C, using anchor point 3..

•It may be necessary to loosen the tether and vehicle seat belt before adjusting the recline position..

24

Figure E shows the tether when the child restraint is

 

acceptable for continued use. The colored stitching

 

will be intact and the webbing will be held under a

 

tether label..

 

Figure F shows the tether when the child restraint

F

is unacceptable for continued use. The colored

 

stitching will be broken and the loops will have pulled through the back side of the shell. The tether label may also be torn. If this condition occurs, discontinue use of the child restraint and contact Britax Consumer Services for further instruction..

25

Page 13 Page 15
Page 14
Image 14
Britax Britix Marathon manual Using the Versa-Tether, Rear-Facing Tether Connector Strap, Energy-Absorbing Tether
Page 13 Page 15

Britix Marathon specifications

The Britax Britix Marathon is a leading convertible car seat designed for parents who prioritize safety, comfort, and usability. This innovative car seat caters to children ranging from 5 to 65 pounds, accommodating infants, toddlers, and preschoolers alike. The Marathon is engineered with a focus on security, featuring advanced safety technologies that set it apart in the crowded market of child restraint systems.

One of the cornerstone safety features of the Britix Marathon is its SafeCell Impact Protection system. This technology includes a base that compresses during a collision, effectively lowering the center of gravity and reducing the risk of seat rotation, which in turn minimizes the force of impact on the child. The car seat also comes equipped with a steel frame that adds an extra layer of strength and stability, reinforcing the overall safety of the seat during travel.

The Marathon is designed with a high-quality harness system that boasts a no-rethread feature, allowing for easy adjustments as your child grows. This makes securing your child easier and ensures that the harness fits snugly at all times, maximizing safety and comfort. The car seat also features two recline positions that promote an optimal fit in various vehicles, providing versatility as well as comfort for your child.

Comfort is not overlooked in the Britix Marathon. The seat is generously padded with premium materials that provide a soft and cozy ride for little ones. In addition, it is equipped with breathable fabrics that help regulate temperature, ensuring your child stays comfortable throughout your journey, regardless of the weather conditions.

Parents will appreciate the ease of installation that the Marathon offers. The car seat is compatible with both the LATCH system and the vehicle seat belt, giving caregivers flexibility and convenience. An integrated lock-off helps secure the seat belt, adding an extra layer of safety during installation.

The Britix Marathon is also easy to clean, featuring a removable and washable cover. This practical design consideration helps maintain hygiene. With its blend of functionality, safety, and comfort, the Britix Britix Marathon stands out as an excellent choice for families looking for a reliable and trustworthy convertible car seat.