CO ALARM SPECIFICATIONS

Gas Detection at Typical Temperature and Humidity Ranges: The CO Alarm is not formulated to detect CO levels below 30 ppm typically. UL tested for false alarm resistance to Methane (500 ppm), Butane (300 ppm), Heptane (500 ppm), Ethyl Acetate (200 ppm), Isopropyl Alcohol (200 ppm) and Carbon Dioxide (5000 ppm). Values measure gas and vapor concentrations in parts per million.

Required Alarm Levels: Before 10% COHb exposure at levels of 30% to 70% Relative Humidity (RH):

•400 ppm CO between 4 and 15 minutes

•150 ppm CO between 10 and 50 minutes

•70 ppm CO between 60 and 240 minutes

The unit is designed not to alarm when exposed to a constant level of 30 ppm for 30 days.

Audible Alarm: 85dB minimum at 10 feet

Power: Powered by 120V AC. When power is on, green light shines continuously. Digital Display: Dash lit by READY.

Display Accuracy: Accuracy is +100% -40% of actual concentration of CO at 50% RH +/- 5% RH and 73˚F +/- 4˚F (23˚+/- 2˚C).

Peak CO Reading: Digital Display shows the highest level of CO (ppm) detected since the Peak memory was last cleared.

6

Malfunction: Yellow light shines continuously. Red light flashes. Horn chirps twice a minute. Digital Display will read “Err”.

Dimensions: 5.83" x 3.32" x 1.6" (Approx.)

Supply Voltage: 120V AC 60Hz

.085A Standby .087A Alarm

During Alarm: CO Alarm horn sounds while the

red light flashes rapidly. Digital Display: Shows CO levels in ppm.

Warranty: 5-year limited warranty.

Standards: Underwriters Laboratories Inc. Single and Multiple Station carbon monoxide alarms UL2034.

According to Underwriters Laboratories Inc. UL2034, Section 1-1.2: “Carbon monoxide alarms covered by these requirements are intended to respond to the presence of carbon monoxide from sources such as, but not limited to, exhaust from internal-combustion engines, abnormal operation of fuel-fired appliances, and fireplaces. CO alarms are intended to alarm at carbon monoxide levels below those that could cause a loss of ability to react to the dangers of Carbon Monoxide exposure.” This CO Alarm monitors the air, and is designed to alarm before CO levels become life threatening. This allows you precious time to leave the house and correct the problem. This is only possible if alarms are located, installed, and maintained as described in this manual.

Page 7 Page 9
Page 8
Image 8
BRK electronic CO2120PDN user manual CO Alarm Specifications, Supply Voltage 120V AC 60Hz
Page 7 Page 9

CO2120PDN specifications

The BRK electronic CO2120PDN is a top-of-the-line carbon monoxide detector designed to enhance safety in residential and commercial spaces. Featuring advanced technology and a user-friendly design, this device effectively monitors for harmful levels of carbon monoxide, offering peace of mind to users.

One of the standout features of the CO2120PDN is its electrochemical sensor, which is known for its high accuracy and sensitivity. This type of sensor is specifically engineered to detect even the smallest amounts of carbon monoxide, ensuring that any dangerous buildup of this colorless, odorless gas is identified promptly. The electrochemical sensor also provides a rapid response time, which is crucial for alerting occupants to potential hazards before they can cause harm.

The CO2120PDN boasts a robust digital display that provides real-time information on carbon monoxide levels. This display is not only informative but also user-friendly, ensuring that even those who are not technologically savvy can easily interpret the data. In addition to real-time monitoring, the device is equipped with a memory feature that stores the highest levels of carbon monoxide detected. This can be useful for identifying trends over time and understanding potential sources of pollution.

An important aspect of the CO2120PDN is its adaptability. It can be powered by either a sealed lithium battery or AC power, providing users with options depending on their specific needs and circumstances. The battery backup ensures that the device remains operational even during power outages, a critical feature in emergencies.

The device also includes an alarm function that emits a loud, attention-grabbing tone when it detects carbon monoxide levels that exceed safe thresholds. This alarm is designed to wake sleeping individuals, providing an essential layer of safety, especially in households with children or elderly residents.

Installation of the CO2120PDN is straightforward, and it can be mounted on a wall or placed on a flat surface. The device is also lightweight and compact, ensuring that it can fit comfortably in various locations without taking up too much space.

Overall, the BRK electronic CO2120PDN stands out for its advanced sensing technology, user-friendly features, and reliable performance. Whether in a family home or a commercial establishment, this device is an essential tool for protecting against the dangers of carbon monoxide exposure. With its commitment to safety and innovation, BRK electronic continues to deliver high-quality products that meet the needs of consumers.
Top Page Image Contents