HOW YOUR CO ALARM WORKS

General Information

CAUTION!

Leave your CO Alarm plugged in year-round. CO problems can occur any time during the year, and this alarm can only alert you if it is plugged in and receiving power.

This CO Alarm is intended for use in a standard, unswitched 120V AC wall outlet. It is not intended for use in extension cords, power strips, or outlets controlled by a switch or dimmer. These may not provide continuous power to the unit. When fully powered, it samples the air and takes a new reading about every second. A microchip inside the unit stores each reading, and remembers the levels of CO it has been exposed to over time. The unit goes into alarm mode when it has been exposed to a “critical” level of CO (measured in parts per million or “ppm”) within a specified time (measured in minutes). When the unit is in alarm mode, the Digital Display will show the levels of CO, measured in parts per million, present. This Carbon Monoxide Alarm features a permanently installed sensor, three colored indicator lights, and an 85 dB alarm horn. It also has a silence feature to temporarily quiet the alarm horn.

Malfunction Warning

This unit performs self-diagnostic tests approximately every second. If the Alarm malfunctions, it should be replaced immediately.

2

The Cover Of Your CO Alarm

14

2

3

5

67

1Test/Silence Button: Press and release

to select mode (Test, Peak or Clear Peak); Press and hold to execute function (Test, Peak or Clear Peak), or to silence the alarm.

2POWER Light (Green)

3SERVICE Light (Yellow)

4ALARM Light (Red)

5Digital Display: Shows carbon monoxide levels, measured in parts per million.

6Air Vents

7Alarm Horn: 85db audible alarm for test, alarm, and unit malfunction warning.

Page 3 Page 5
Page 4
Image 4
BRK electronic CO2120PDN HOW Your CO Alarm Works, General Information, Malfunction Warning, Cover Of Your CO Alarm
Page 3 Page 5

CO2120PDN specifications

The BRK electronic CO2120PDN is a top-of-the-line carbon monoxide detector designed to enhance safety in residential and commercial spaces. Featuring advanced technology and a user-friendly design, this device effectively monitors for harmful levels of carbon monoxide, offering peace of mind to users.

One of the standout features of the CO2120PDN is its electrochemical sensor, which is known for its high accuracy and sensitivity. This type of sensor is specifically engineered to detect even the smallest amounts of carbon monoxide, ensuring that any dangerous buildup of this colorless, odorless gas is identified promptly. The electrochemical sensor also provides a rapid response time, which is crucial for alerting occupants to potential hazards before they can cause harm.

The CO2120PDN boasts a robust digital display that provides real-time information on carbon monoxide levels. This display is not only informative but also user-friendly, ensuring that even those who are not technologically savvy can easily interpret the data. In addition to real-time monitoring, the device is equipped with a memory feature that stores the highest levels of carbon monoxide detected. This can be useful for identifying trends over time and understanding potential sources of pollution.

An important aspect of the CO2120PDN is its adaptability. It can be powered by either a sealed lithium battery or AC power, providing users with options depending on their specific needs and circumstances. The battery backup ensures that the device remains operational even during power outages, a critical feature in emergencies.

The device also includes an alarm function that emits a loud, attention-grabbing tone when it detects carbon monoxide levels that exceed safe thresholds. This alarm is designed to wake sleeping individuals, providing an essential layer of safety, especially in households with children or elderly residents.

Installation of the CO2120PDN is straightforward, and it can be mounted on a wall or placed on a flat surface. The device is also lightweight and compact, ensuring that it can fit comfortably in various locations without taking up too much space.

Overall, the BRK electronic CO2120PDN stands out for its advanced sensing technology, user-friendly features, and reliable performance. Whether in a family home or a commercial establishment, this device is an essential tool for protecting against the dangers of carbon monoxide exposure. With its commitment to safety and innovation, BRK electronic continues to deliver high-quality products that meet the needs of consumers.
Top Page Image Contents