CAT. FG225B/FG250B
FRONT |
| SIDE | Back |
VIEW |
| VIEW | View |
|
|
|
|
4.25”
1.6”
A R C H I T E C T U R A L A N D E N G I N E E R I N G S P E C
1.A dual ionization sensing chamber.
2.The unit shall be capable of self restoring.
3.A fully screened sensing chamber to resist entry of small insects thereby reducing the probability of unwanted alarms.
4.Powered by a supervised 9V battery and a solid state piezo horn rated at 85dB at 10 ft.
5.A visual LED
6.A full function test button. The test button should check all alarm functions by stimulating the chamber to simulate a smoke condition, causing the unit to alarm. Model FG250 also has a silence feature to silence unwanted nuisance alarms.
7.A tamper resistant locking pin that locks alarm cover to prevent removal of battery.
8.The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 90%.
9.The unit shall contain mounting hardware and shall be listed for wall or ceiling mounting.
10.The unit shall at a minimum meet the requirements of UL217, CSFM, NFPA 72, NFPA 101, ICC.
11.The unit shall be suitable for use in Recreational Vehicles.
I N S TA L L AT I O N O F A L A R M
Installation of this smoke alarm must conform to NFPA 72. Always check your local building codes. Follow all instructions for placement as outlined in the user’s manual in sections titled “Recommended Locations for Smoke Alarms” and “Locations to Avoid for Smoke Alarms”.
1
T E C H N I C A L S P E C S :
Alarm Dimensions: | 4.25” dia x 1.6”H |
Weight: | 4.8 oz. |
|
|
Operating Voltage: | 9V Battery Powered |
Temperature Range: | 40˚F (4˚C) to 100˚F (38˚C) |
Humidity Range: | 10% to 95% relative humidity (RH) |
|
|
Audio Alarm: | 85dB at 10 feet |
Test/Silence: | Electronically simulates smoke condition, causing |
(FG250) | the unit to alarm |
Alarm Reset: | Automatic when smoke clears |
Smoke Sensor: | Dual Ionization |
|
|
Indicator Lights: |
|
DC Power: | Intermittent Red Light |
Listing | ETL to UL217 Standard |
S H I P P I N G S P E C S :
Individual Carton Dimensions | 4.38 ”L x 1.75”W x 4.38”H |
Weight | .67lbs. |
Cube | .02 ft3 |
UPC | FG225B: 0 29054 00303 4 |
| FG250B: 0 29054 00300 3 |
| FG250AB: 0 29054 00311 9 |
| FG250LB: 0 29054 00310 2 |
|
|
Master Carton Dimensions | 9.2 ”L x 5.5”W x 5.1”H |
Master Pack | 6 |
Weight | 3.2 lbs. |
Cube | .15 ft3 |
I2 of 5 | FG225B: 600 29054 00303 6 |
| FG250B: 600 29054 00300 5 |
| FG250AB: 600 29054 00311 1 |
| FG250LB: 600 29054 00310 4 |
|
|
Pallet Information |
|
Cases per Layer | 36 |
Number of Layers | 9 |
Cases per Pallet | 324 |
Units per Pallet | 1,944 |
Cube | 55.0 ft3 |
Weight | 1,107lbs. |
|
|
2
3
4
The parts of this smoke alarm
1.“Open Here”
2.“No Battery” tab
3.Test button or
Test/Silence button (FG250 only)
4.Smoke alarm base
5.Mounting slots
6.Install 9V battery here
7.Locking pin slot
8.Locking pin: Remove and insert in 7
7
8
6 | 7 | 5 |
|
|
©2008 BRK Brands, Inc. a Jarden Corporation company (NYSE: JAH)
3901 Liberty Street Road Aurora IL
BRK is a registered trademark of BRK
brkelectronics.com Brands,Inc.
CM2885
