PROTECTING YOUR FAMILY FROM FIRE

Putting up smoke alarms is one step in protecting your family from fires. You must also reduce the chance a fire will start in your home, and have a plan for escaping safely if one does. To have a good fire safety program, you must:

Develop a family escape plan and practice it with everyone in your family, including small children. 1) Draw a floor plan of your home and identify at least two exits from each room and one way to get out of each bedroom without opening the door; 2) Decide on a meeting place a safe distance from home, and make sure everyone knows to wait there; 3)

Know where to go to call the Fire Department from outside the home; 4) Make sure everyone—including all children— know what the alarm signal means and how to react to it. Teach them they must be prepared to leave the home by themselves if needed; 5) Hold fire drills every 6 months and practice how to escape safely. Show children how to check if doors are hot before opening them. Show them how to use an alternate exit if a door is hot and shouldn’t be opened. Teach them to stay close to the floor and crawl if necessary.

Install at least one smoke alarm on every level of your home, in every bedroom, and in every sleeping area.

Keep alarms clean, and test them weekly. Replace smoke alarms immediately if they are not working properly. Smoke alarms that do not work cannot alert you to a fire.

HOW TO INSTALL THIS SMOKE ALARM

WARNING!

The battery was shipped “backwards” in the smoke alarm to keep it fresh. The smoke alarm cannot work until you remove the battery and reinstall it in the correct position (Follow polarity markings in the battery compartment).

This smoke alarm has a battery guard which prevents it from closing unless a battery is installed. This warns you the unit will not operate without a battery.

1

Keep at least one working fire extinguisher on every floor, and an additional one in the kitchen. Have fire escape ladders or other reliable means of escape from an upper floor in case stairs are blocked.

Follow safety rules, and prevent hazardous situations: 1) Use smoking materials properly. Never smoke in bed.

2)Keep matches or lighters away from children; 3) Store flammable materials in proper containers; 4) Keep electrical appliances in good condition and don’t overload electrical circuits; 5) Keep stoves, barbecue grills, fireplaces and chimneys grease- and debris-free; 6) Never leave anything cooking on the stove unattended; 7) Keep portable heaters and open flames, like candles, away from flammable materials; 8) Don’t let rubbish accumulate.

WHAT TO DO IN CASE OF FIRE

Don’t panic; stay calm. Follow your family escape plan. Your safe escape may depend on thinking clearly and remembering what you have practiced.

Get out of the house as quickly as possible. Don’t stop to get dressed or collect anything.

Feel doors with the back of your hand before opening them to see if they are hot. If a door is cool, open it slowly. Don’t open a hot door—use an alternate escape route.

Cover your nose and mouth with a cloth (preferably wet). Take short, shallow breaths.

Keep doors and windows closed, unless you need to escape through them.

Meet at your planned meeting place outside your home, and do a head count to make sure everybody got out safely.

Call the Fire Department as soon as possible from outside. Give your address, then your name.

Never go back inside a burning building for any reason.

Contact your Fire Department for ideas on making your home safer and on creating your own family escape plan.

IMPORTANT! READ BEFORE INSTALLING SMOKE ALARM

Read “Where To Install Smoke Alarms” and “Where Not To Install Smoke Alarms” before beginning. This unit monitors the air, and when smoke reaches its sensing chamber, it alarms. It can give you more time to escape before fire spreads. This unit can ONLY give an early warning of developing fires if it is installed, maintained and located where smoke can reach it, and where all residents can hear it, as described in this manual. This unit will not sense gas, heat, or flame. It cannot prevent or extinguish fires.

Cover of Smoke Alarm

1

“Open Here” tab

3

Test button and

 

 

 

power/alarm indicator

 

 

 

 

2

Cover hinge

4

Silence button

 

 

 

 

 

3

2

 

 

 

4

5

 

5

 

 

6

7

Parts of Smoke Alarm (Cover Open)

1

“Open Here” tab

 

2

Test button and power/alarm indicator

3

Silencer button

 

4

Smoke alarm base

 

5

Mounting slots

 

6

DO NOT install any battery here!

7

Install 9V battery here

 

WARNING!

This unit will not alert hearing impaired residents. It is recommended that you install special units which use devices like flashing strobe lights to alert hearing impaired residents.

Do not connect this unit to any other alarm or auxiliary device. It is a single-station unit that cannot be linked to other devices. Connecting anything else to this unit may prevent it from working properly.

CAUTION!

Do not install this unit over an electrical junction box. Air currents around junction boxes can prevent smoke from reaching the sensing chamber and prevent the unit from alarming. Only AC powered units are intended for installation over junction boxes.

Do not stand too close to the unit when the alarm is sounding. It is loud to wake you in an emergency. Exposure to the horn at close range may harm your hearing. When testing the unit, step back when the horn starts sounding.

Do not paint over the unit. Paint may clog the openings to the sensing chamber and prevent the unit from operating properly.

3

Page 3
Image 3
BRK electronic Smoke Alarms Protecting Your Family from Fire, HOW to Install this Smoke Alarm, What to do in Case of Fire

Smoke Alarms specifications

BRK electronic smoke alarms have long been recognized as a reliable choice for enhancing fire safety in homes and commercial spaces. These devices incorporate advanced technologies designed to detect smoke and alert occupants, helping to prevent potential disasters.

One of the most notable features of BRK smoke alarms is their dual-sensor technology. Many models use both ionization and photoelectric sensors, which together provide a more comprehensive detection system. Ionization sensors are highly responsive to fast-flaming fires, while photoelectric sensors are more effective at detecting smoldering fires. This dual approach ensures that users are alerted to a wider range of fire types, enhancing overall safety.

Another significant characteristic is the incorporation of a 9V battery backup in many BRK models. This feature ensures that the smoke alarm remains functional even during power outages, providing peace of mind. Some units are hardwired, connecting directly to the home’s electrical system, but still include battery backup for added reliability.

BRK smoke alarms also offer user-friendly features such as a hush button, allowing occupants to temporarily silence the alarm in the event of a false alarm, particularly from cooking fumes or steam. This helps to reduce nuisance alarms while ensuring that the device is still fully operational.

In addition to their reliable detection capabilities, BRK smoke alarms often come equipped with a LED indicator. This light offers visual alerts, which can be particularly beneficial for individuals with hearing impairments. Some models also feature a voice alert system, providing verbal notifications that enhance user awareness during emergencies.

Installation is straightforward, with many devices designed for either wall or ceiling mounting. The sleek and modern design of BRK smoke alarms allows them to blend seamlessly into various interior aesthetics, without compromising on functionality.

Another critical aspect of these smoke alarms is their maintenance features. Many BRK models have a self-test button, allowing users to easily check the operational status of the unit, ensuring that it is always ready to perform when needed. Regular maintenance of smoke alarms is essential for optimal performance, and BRK encourages users to replace their units every 10 years as a safety standard.

Overall, BRK electronic smoke alarms combine advanced technology, user-friendly features, and reliable performance, making them an essential component of home and business fire safety plans. With their commitment to quality and safety, BRK continues to be a trusted choice for smoke detection solutions.