IF THIS SMOKE ALARM GOES INTO ALARM

WARNING!

If the unit alarms and you are not testing the unit, it is warning you of a potentially dangerous situation that requires your immediate attention. NEVER ignore any alarm. Ignoring the alarm may result in injury or death. If the unit alarms and you are not absolutely certain of the source of the smoke, get everyone out of the house immediately.

Never remove the batteries from a battery operated smoke alarm to stop an unwanted alarm (caused by cooking smoke, etc.). Removing the batteries disables the alarm so it cannot sense smoke, and removes your protection. Instead open a window or fan the smoke away from the unit. The alarm will reset automatically.

Responding To An Alarm

During an alarm, you will hear a loud, repeating horn pattern: 3 beeps, pause, 3 beeps, pause.

If the unit alarms and you are not absolutely certain of the source of the smoke, get everyone out of the house immediately. Stay calm and follow your family escape plan. Stay as low to the ground as possible, and cover your mouth with a damp cloth. Never open a door before testing it to see if it is hot. Call the Fire Department from outside, and give them your address then name. Read “What To Do In Case Of Fire” for more information.

If the unit alarms and you are certain that the source of smoke is not a fire—cooking smoke or an extremely dusty furnace, for example—open a nearby window or door and fan the smoke away from the unit. This will silence the alarm, and once the smoke clears the unit will reset automatically.

Using the Silence Feature

The silence feature can temporarily quiet an unwanted alarm for several minutes. To use this feature, press the “Push to Silence” button on the cover. The alarm will “chirp” about once a minute (for up to 15 minutes) to remind you the alarm has been silenced. The “chirping” will stop when the unit returns to normal operation.

WARNING!

The silence feature does not disable the unit—it makes it temporarily less sensitive to smoke. For your safety, if smoke around the unit is dense enough to suggest a potentially dangerous situation, it will stay in alarm, or may re-alarm quickly. If you do not know the source of the smoke, do not assume it is an unwanted alarm. Not responding to an alarm can result in property loss, injury or death.

IF YOUR SMOKE ALARM IS NOT WORKING PROPERLY

IMPORTANT!

Smoke alarms may not operate properly because of dead, missing or weak batteries, a build-up of dirt, dust or grease on the smoke alarm cover, or installation in an improper location. Clean the smoke alarm as described in “Regular Maintenance,” and install a fresh battery, then test the smoke alarm again. If it fails to test properly when you

use the test button, or if the problem persists, replace the smoke alarm immediately.

Problem...

You should...

 

 

Smoke alarm alarms when

• Clean the smoke alarm. (See “Regular Maintenance.”)

no smoke is visible.

• Check the location of the smoke alarm.

 

(See “Where To Install Smoke Alarms.”)

 

 

You experience frequent unwanted alarms (like

• Check the location of the smoke alarm.

in response to cooking smoke).

(See “Where To Install Smoke Alarms.”)

 

 

Smoke alarm “chirps” intermittently.

• Check that the battery is installed correctly and is

 

working properly. (See “How to Install This Smoke

 

Alarm” and “Weekly Testing.”)

 

• Check the location of the smoke alarm.

 

(See “Where To Install Smoke Alarms.”)

 

• Clean the smoke alarm. (See “Regular Maintenance.”)

 

 

Smoke alarm “chirps” about once a minute.

• Replace the battery. (See “Regular Maintenance.”)

 

 

Alarm horn doesn’t sound during testing.

• Check that the battery is installed correctly and is work-

 

ing properly. (See “How to Install This Smoke Alarm”

 

and “Weekly Testing.”)

 

 

Alarm horn will not silence when you

Do not ignore the alarm! Smoke present may be too

push the Silence button.

dense, indicating an emergency situation.

 

 

If the smoke alarm is still not operating properly, and it is still under warranty, send it, shipping prepaid, along with original purchase receipt (or write down date purchased), to: BRK Brands, Inc., Attn.: Consumer Affairs, 3920 Enterprise Court, Aurora, IL 60504-8132. Enclose a note in the package describing what is wrong with the unit.

WARNING!

Do not try to fix the unit yourself—this will void your warranty!

10-YEAR LIMITED WARRANTY

Coverage: BRK Brands, Inc. warrants its enclosed smoke alarm to be free from defects in materials and workmanship under normal use for a period of ten years from the date of purchase. During the first year after the date of purchase, BRK Brands, Inc. will replace any defective smoke alarm without charge. During the next nine years, BRK Brands, Inc. will replace any defective smoke alarm at a charge to you not to exceed BRK Brands, Inc.’s cost. This is your exclusive warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. Dealers, service centers, or retail stores selling this product do not have the right to alter, modify or any way change the terms and conditions of this warranty. In new construction, if your smoke alarms were installed by a contractor, this warranty is valid for the homeowner at the time of installation from the date of original installation and is not transferable.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage, current or battery, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than BRK Brands, Inc. Further, the warranty does not cover acts of God, such as fire, flood, hurricanes and tornadoes.

BRK Brands, Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in duration for 10 years. Some states, provinces, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state, or province to province.

Service: Units under warranty and in need of repair should be returned, shipping prepaid, to BRK Brands, Inc., Attn.: Consumer Affairs, 3920 Enterprise Court, Aurora, IL 60504-8132.

Warranty: BRK Brands, Inc. makes no warranty, express or implied, written or oral, including that of merchantability or fitness for any particular purpose, with respect to the battery.

BRK Electronics® is a registered trademark

M06-2086-001 8/99

of BRK Brands, Inc.

5

Page 5
Image 5
BRK electronic Smoke Alarms user manual If this Smoke Alarm Goes Into Alarm, If Your Smoke Alarm is not Working Properly

Smoke Alarms specifications

BRK electronic smoke alarms have long been recognized as a reliable choice for enhancing fire safety in homes and commercial spaces. These devices incorporate advanced technologies designed to detect smoke and alert occupants, helping to prevent potential disasters.

One of the most notable features of BRK smoke alarms is their dual-sensor technology. Many models use both ionization and photoelectric sensors, which together provide a more comprehensive detection system. Ionization sensors are highly responsive to fast-flaming fires, while photoelectric sensors are more effective at detecting smoldering fires. This dual approach ensures that users are alerted to a wider range of fire types, enhancing overall safety.

Another significant characteristic is the incorporation of a 9V battery backup in many BRK models. This feature ensures that the smoke alarm remains functional even during power outages, providing peace of mind. Some units are hardwired, connecting directly to the home’s electrical system, but still include battery backup for added reliability.

BRK smoke alarms also offer user-friendly features such as a hush button, allowing occupants to temporarily silence the alarm in the event of a false alarm, particularly from cooking fumes or steam. This helps to reduce nuisance alarms while ensuring that the device is still fully operational.

In addition to their reliable detection capabilities, BRK smoke alarms often come equipped with a LED indicator. This light offers visual alerts, which can be particularly beneficial for individuals with hearing impairments. Some models also feature a voice alert system, providing verbal notifications that enhance user awareness during emergencies.

Installation is straightforward, with many devices designed for either wall or ceiling mounting. The sleek and modern design of BRK smoke alarms allows them to blend seamlessly into various interior aesthetics, without compromising on functionality.

Another critical aspect of these smoke alarms is their maintenance features. Many BRK models have a self-test button, allowing users to easily check the operational status of the unit, ensuring that it is always ready to perform when needed. Regular maintenance of smoke alarms is essential for optimal performance, and BRK encourages users to replace their units every 10 years as a safety standard.

Overall, BRK electronic smoke alarms combine advanced technology, user-friendly features, and reliable performance, making them an essential component of home and business fire safety plans. With their commitment to quality and safety, BRK continues to be a trusted choice for smoke detection solutions.