BRK electronic ULCS-530 manual Alarm Relay, Smart Interconnect, Meets Ul Standards, CAT.RM4

RELAY

CAT.RM4

ALARM RELAY

Activates auxiliary devices from smoke, CO and/or heat alarm signal.

SMART

INTERCONNECT

Works with all First Alert and BRK “Smart Interconnect” CO Alarms.

MEETS UL

STANDARDS

UL217, UL2034 and UL539 for accessories.

MEETS ULC

STANDARDS

ULC S-531, CSA6.19 and

ULC S-530 for accessories.

FITS IN MOST

STANDARD ELECTRICAL BOXES

120V AC, 60Hz Wire-in

Designed to activate an auxiliary device when an alarm is initiated. The RM4 Relay is intended for use with BRK and First Alert Smoke, Heat and Carbon Monoxide Alarms. The relay contacts will activate whenever any interconnected alarm sounds. The relay contacts will automatically deactivate a few seconds after the alarm stops sounding. The RM4 may be wired next to an AC alarm or from a remote location. This relay must be installed in a junction box.

Interconnects smoke alarms, carbon monoxide alarms and heat alarms with:

•Lights

•Bells

•Door Closers

•Sirens

•Exit Signals

•Escape Lights

•Exhaust Fans

•Other Auxiliary Devices