Broan C306, C305RW manual Recommended NEW Construction Wiring, Replacing Existing 2-NOTE Chime

INSTALLATION (continued)

6. Connect wires to appropriate terminals.

RECOMMENDED NEW CONSTRUCTION WIRING

Ground

120 Volt AC

	16 VAC	Front	Side
Transformer

Lighted or

Unlighted Buttons

Rear

1 2 3 F S R NOT USED

Nine volt batteries not used

- OPTIONAL -

Volume Control

2 or 3 chimes can be connected to a single transformer.

							2 chimes require
							transformer
							Model C909 or
REPLACING EXISTING 2-NOTE CHIME							C907.
Ground							3 chimes require
							transformer
120 Volt AC							Model C907.
							Lighted or
							Unlighted Buttons
	16 VAC			Front	Side		Rear
	Transformer
	1	2	3	F	S	R	NOT USED
9V	9V
Requires Two
9 Volt Batteries
	Volume Control

7.Install two (2) alkaline 9-volt batteries, if appropriate for your application. Turn on power at service entrance. Make sure pushbuttons operate chime properly. (Adjust switch on circuit board for 4 or 8 chime tones at front door. Side and rear doors will have 1 chime tone each.)

8.Hook cover over chime mechanism.

2