![](/images/new-backgrounds/1087961/8796113x1.webp)
INSTALLATION OF GLASS
FRAME (Optional)
1.Fit the glass frame above the hood.
2.Attach the (3) supplied brackets to the hood.
3.Fit the supplied adhesive pads on the glass frame in correspondence to its mounting screws in order to prevent the glass from breaking.
4.Adjust the position of the glass frame and attach it with the mounting screws (M4x20mm).
Please be very careful not to hit the glass with any objects made of porcelain, metal, glass or anything else that is very heavy.
SUPPLIED
BRACKETS
GLASS FRAME
MOUNTING SCREWS (M4x20mm)
ADHESIVE
PADS
CONNECT DUCTWORK
1.Position the hood near the lower part of the support frame and connect the duct to the discharge collar.
2.Use 8" round metal duct to connect the discharge collar on the hood to the ductwork above.
3.Use duct tape to make all joints secure and air tight.
8” DUCT
DISCHARGE COLLAR
- 7 -