Broan QS2 warranty To Top/Back Edge of hood

Models: QS2

1 16
Download 16 pages 42.13 Kb
Page 4
Image 4

ALLURE® QS2 SERIES

RANGE HOOD

®

Page 4

PREPARE THE HOOD

TOP RECTANGULAR

 

DUCT KNOCKOUT

SEMI-CIRCULAR

(Remove for 3¼” x 10”

DUCT KNOCKOUT

Vertical & for 7” Round

(Remove for 7” Round

Discharge)

Discharge)

 

REAR

RECTANGULAR

DUCT KNOCKOUT

(Remove for 3¼” x 10” Horizontal Discharge)

11Remove appropriate Duct Knockout(s) from top or back of hood.

PREPARE THE HOOD

TAPE

TOP/BACK

UP TO 1”

EDGE

SIDE-TO-SIDE

 

ADJUSTMENT

 

➙➙

DAMPER/

PIVOTDUCT CONNECTOR (Vertical discharge position shown)

13 3¼” x 10” Ducted Discharge Only: Remove Tape from

damper flap and attach Damper/Duct Connector over

knockout opening with screws removed in Step 4 under

“PREPARE THE HOOD”. Make sure damper Pivot is nearest

to Top/Back Edge of hood.

14 7” Round Ducted Discharge Only: Re-install 7” Round Duct

Plate removed in Step #1 under “PREPARE THE HOOD”.

Install a 7” round damper (purchase separately). Damper

flap must open freely in direction of airflow (away from range

hood).

SCREW

TIES

NOTE To accomodate off-center ductwork, the Damper/Duct Connector can be installed up to 1-inch on either side of hood center or the 7” Round Duct Plate can be installed up to ½” on either side of hood center. In extreme off-center installations, one end of the duct connector may need to be trimmed to clear the electrical cable clamp.

BLOWER TAB

RETAINING WHEEL RING

SMALL DIAMETER

END

SECTIONS

RING

 

 

 

 

 

MOTOR

STOP

 

SLOTS

EDGE

METAL STRIP

PLATE

12Horizontal Discharge Only: Remove the Plate in front of the horizontal discharge knockout. Cut the Ties, lift plate out, and discard plate. DO NOT REMOVE the Metal Strip held in

place with two Screws.

15 Non-Ducted Installations Only: Require a Performance Ring to be attached to the blower wheel.

To install ring:

1. Remove the Blower Wheel by rocking it side to side and applying a slight force to pull wheel from motor. Remove Retaining Ring if necessary.

2. Slide the ring onto the Small Diameter End of the wheel and down to the Stop Edge of the wheel.

3. Reassemble wheel to motor. Make sure Tab on wheel fits into one of the Motor Slots.

4. Push wheel down until it is locked in place.

5. Check that wheel is properly positioned as shown. Press Sections into place if necessary. Make sure wheel turns freely.

Page 4
Image 4
Broan QS2 warranty To Top/Back Edge of hood

QS2 specifications

The Broan QS2 series range hood is an exemplary blend of style, performance, and efficiency, designed to cater to the demands of modern kitchens. Known for its sleek contemporary design, the QS2 offers a seamless integration into a wide variety of décors while providing essential features for effective ventilation.

One of the standout characteristics of the Broan QS2 series is its powerful ventilation system. It includes a multi-speed blower that allows users to easily adjust the airflow according to their cooking needs. With varying speeds, it effectively captures smoke, steam, and odors, ensuring that your kitchen air remains fresh and clean. The range hood has an impressive CFM (cubic feet per minute) rating, which speaks to its ability to handle high heat cooking in large kitchens.

Another key feature of the Broan QS2 is its quiet operation. The advanced design of the motors and the strategically placed baffle filters minimize noise, making it possible to enjoy conversation and music while cooking. This is particularly beneficial for open-concept kitchen designs, where sound can easily travel.

The QS2 series is equipped with high-quality baffle filters that are not only effective in trapping grease but are also dishwasher safe. This makes maintenance convenient and hassle-free, encouraging regular cleaning to ensure optimum performance. The filters are designed to fit snugly, ensuring that no grease or smoke escapes into your kitchen.

In terms of lighting, the Broan QS2 features built-in LED lights that illuminate the cooking surface efficiently. These energy-efficient lights offer bright, clear illumination, making it easier to monitor cooking progress, particularly during intricate culinary tasks. Their long lifespan also reduces the need for frequent replacements.

Another technological highlight of the QS2 is its easy-to-use electronic controls, which provide intuitive operation. With features such as a clock and timer functions, it simplifies the cooking process, allowing cooks to focus on preparing meals.

The Broan QS2 series not only excels in functionality but also in aesthetics. Available in various finishes, including stainless steel, it adds a touch of elegance to any kitchen space. Its sleek profile and modern design elements can enhance the overall décor while maintaining utility.

In summary, the Broan QS2 series range hood is a perfect combination of style, performance, and advanced technology. With features such as powerful ventilation, quiet operation, easy maintenance, efficient lighting, and user-friendly controls, it stands out as a premium choice for homeowners looking to elevate their cooking experience while maintaining a clean and stylish kitchen.