Brocade Communications Systems 12.4.00a Configure a transaction rate limit default

ServerIron ADX Security Guide 9
53-1002440-03
Transaction Rate Limit (TRL) 1
1. Enable privileged EXEC mode.
ServerIronADX> enable
2. Enter global configuration mode.
ServerIronADX# configure terminal
3. Specify the name of the transaction rate limit rule set and enter client transaction rate limit
configuration mode.
ServerIronADX(config)# client-trans-rate-limit tcp TRL1
Syntax: [no] client-trans-rate-limit tcp | udp | icmp <name>
4. Specify the trl parameter for the client subnet and the exclude keyword.
For IPv4:
ServerIronADX(config-client-trl-TRL1)# trl 100.1.1.0 255.255.255.0 exclude
For IPv6:
ServerIronADX(config-client-trl-TRL1)# trl 300::1/128 exclude
Syntax: [no] trl { <client-IPv4> <client-mask> | <client-IPv6> <prefix> } exclude
Configure a transaction rate limit default
You can specify a default transaction rate limit configuration for all other clients that are not
explicitly configured. To create a transaction rate limit default for a group, follow these steps.
1. Enable privileged EXEC mode.
ServerIronADX> enable
2. Enter global configuration mode.
ServerIronADX# configure terminal
3. Specify name of transaction rate limit rule set and enter client transaction rate limit
configuration mode.
ServerIronADX(config)# client-trans-rate-limit tcp TRL1
Syntax: [no] client-trans-rate-limit tcp | udp | icmp <name>
4. Specify the default trl parameter for this group.
ServerIronADX(config-client-trl)# trl default monitor-interval 3 conn-rate 10
hold-down-time 1
Syntax: [no] trl default monitor-interval <mon-value> conn-rate <con-value> hold-down-time
<hold-down-value>