Manuals / Brands / Computer Equipment / Server / Brocade Communications Systems / Computer Equipment / Server

Brocade Communications Systems 53-1000571-01 Using the CMC CLI to set the IP address

1 48

Download 48 pages, 2.31 Mb

4424 Blade Server SAN I/O Module Hardware Reference Manual 11

53-0000571-01

Modify the SAN I/O Module IP address 2

c. From the Hyperterminal window, click the Connect drop-down menu and select an

available COM port.

d. Click OK.

e. From the COM Port Properties window, select the following configuration values:

•Bits per second: 9600

•Databits: 8

•Parity: None

•Stop bits: 1

•Flow Control: None

For LINUX or UNIX

a. Enter the following at the command prompt:

tip /dev/ttyb -9600

b. When the terminal application stops reporting information, press Enter to display the login

prompt.

c. Log in using the default administrative account

Login: admin

Password: password

d. When prompted either change the administrative password, or press Ctrl-C to bypass.

Task 2: Changing the IP address

1. Verify that the SAN I/O Module has completed POST. When POST is complete, the port status

and SAN I/O Module power and status LEDs return to a standard healthy state.

2. Enter the CLI ipAddrSet command.

Follow on-screen instructions and supply the correct information, as shown in the following

example.

switch:admin> ipaddrset

Ethernet IP Address [10.77.77.77]:10.32.53.47

Ethernet Subnetmask [255.255.255.0]:255.255.240.0

Fibre Channel IP Addresss [none]:

Fibre Channel Subnetmask [none]:

Gateway IP Address [0.0.0.0]:10.32.48.1

DHCP [Off]:

IP address is being changed...Done.

3. Enter ipAddrShow at the prompt to verify that the address was correctly set.

Using the CMC CLI to set the IP address

Use the following steps to connect modify the SAN I/O Module IP address through the CMC CLI.

1. Establish a Telnet session to the CMC CLI.

2. At the command prompt, type connect switch-x where x is the bay where the SAN I/O Module is

installed. For example, switch-x can be:

Contents

Main Brocade Communications Systems, Incorporated Document History Hardware Reference Manual 53-1000571-01 New document November 2007 Title Publication Number Summary of Changes Date Contents About this document Chapter 1 Introducing the SAN I/O Module Chapter 2 Configuring the SAN I/O Module Chapter 3 Operating the SAN I/O Module Appendix A SAN I/O Module specifications Index About this document How this document is organized Supported hardware and software Whats new in this document Document conventions Text formatting Notes, attention, caution, and danger Additional information Brocade resources Optional brocade features Other industry resources Getting technical help Document feedback Page Introducing the SAN I/O Module Dual function and access gateway configurations - Determining module configuration Features Full Fabric Switch mode Access Gateway mode Ports on Demand (POD) Hardware Description 56 Port side FIGURE 1 TABLE 1 Nonport side FIGURE 3 3 Labeling SFPs ISL trunking groups Optional features Full Fabric Switch Mode Access Gateway Mode Unpacking and installing the SAN I/O Module Cabling guidelines Configuring the SAN I/O Module Items required Modify the SAN I/O Module IP address Using the SAN I/O Module CLI to set the IP address Task 1: Establish a terminal session with the SAN I/O Module Using the CMC CLI to set the IP address Using the CMC GUI to set the IP address FIGURE 4 Connecting the SAN I/O Module to the Ethernet network Connecting the SAN I/O Module to the fabric Page Changing from Fabric Switch mode to Access Gateway mode Notes Web Tools Command Line Interface Changing from Access Gateway Mode to Fabric Switch Mode Notes Activating Ports on Demand (POD) Activating ports with a POD license Connecting to the SAN I/O Module Using Web Tools Operating the SAN I/O Module Interoperability Port negotiation Operating system support Accessing the SAN I/O Module TABLE 2 TABLE 3 Interpreting POST results Interpreting LED activity Interpreting LED activity Each SAN I/O Module uses LEDs to indicate status. These LEDs are shown in Figure5. FIGURE 5 TABLE 4 Location Indicator Color Operation Removing and replacing the SAN I/O Module TABLE 4 FIGURE 6 Appendix A SAN I/O Module specifications Access Gateway Mode default port mapping Processor and memory specifications Weight and physical dimensions Weight and physical dimensions Table 6 lists the weight and physical dimensions of the SAN I/O Module. Facility requirements TABLE 6 Dimension Measurements Architectural specification Supported HBAs Fibre Channel standards compliance TABLE 8 Regulatory compliance FCC warning (US only) MIC Statement (Republic of Korea) VCCI statement (Japan) Page CE statement Canadian requirements Laser compliance Environmental regulation compliance China RoHS Environmental Protection Use Period (EPUP) Disclaimer TS/HS Dual Language Sheet Environmental regulation compliance A Regulatory certifications CHINAROHS /(HS/TS) TABLE 9 Country Safety specification EMC specification Environmental regulation compliance TABLE 9 Country Safety specification EMC specification Index F