Broil King NBSP-3SP Purchase DateDealer, Read All Instructions Before Use, Initial Use, Figure B

HOW TO USE

We recommend that you record the following information for warranty purposes: Model #________

Purchase Date:_____________Dealer:__________________________

Congratulations on your purchase of a BroilKing Buffet Server!

IMPORTANT SAFEGUARDS

To reduce the risk of personal injury or property damage when using electrical appliances, basic safety precautions should always be followed, including the following:

1.	READ ALL INSTRUCTIONS BEFORE USE.
2.	Do not touch hot surfaces! Always use hot pads or pot holders until unit cools.

warm. For best results use nylon, plastic, wooden or rubber utensils. Metal utensils may be used with care but should not be used to cut food on the cooking surfaces.

Before using for the first time, become familiar with the Buffet Server features, Figure A. Wash removable parts in warm sudsy water, rinse and dry. Clean the warming tray base with a mild detergent and a soft moist cloth. Do not use any scouring agents! DO NOT SUBMERGE THE WARMING BASE OR LET THE PLUG COME IN CONTACT WITH WATER. Rinse and wipe dry. Do not allow water to spill or seep into the frame.

5 Chafing Dishes and Lids (NBS-5SP)l 2 Chafing Dishes and Lids (NBS-2SP)

3 Chafing Dishes and Lids (NBS-3SP & NBS-3SLP)

3.	To protect against electrical shock, do not immerse tray base, cord or plug
	in water or other liquid.
4.	Close supervision is necessary when any appliance is used by or near children.
5.	Unplug from outlet when not in use and before cleaning. Allow to cool
	completely before putting on or taking off parts, and before cleaning or storing
	the appliance.
6.	Do not operate any appliance with a damaged cord or plug or after
	the appliance malfunctions or has been damaged in any manner.
	Return the appliance to the BroilKing Factory Service Department
	(call 860-738-2200 first) for examination, repair or adjustment.(*Canadian
	customers contact BroilKing at 860-738-2200 for Canadian Service locations.)
7.	The use of accessory attachments not recommended by the appliance
	manufacturer may cause injuries.
8.	Do not use outdoors.

Chafing Dish Holder

(1 on NBS-2SP,

NBS-3SP &

NBS-3SLP;

2 on NBS-5SP)

Figure B

Utensil slot

Figure A

Warming	Variable
	Thermostat Knob
base
	(Note: NBS-5SP
	has 2 Knobs)

Signal Light

Line (Note: NBS-5SP has 2 Lights)

9.	Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner or in a heated oven.
11.	It is recommended that this appliance not be moved when it contains hot oil
	or other hot liquid.
12.	Do not clean with metal scouring pads. They can scratch and ruin the
	finish of your unit.
13.	Do not use appliance for other than intended use.
14.	DO NOT USE PLASTIC DISHES OR PLASTIC WRAP ON TRAY .

SAVE THESE INSTRUCTIONS

This product is for household use only.

NOTE: A short power supply cord (or cord set) has been provided to reduce the hazards resulting from becoming entangled in or tripping over a longer cord. Longer cord sets or extension cords may be used if care is properly exercised in their use. If a long cord set or extension cord is used, the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over accidentally.

The high-tech warming surface will remain unblemished for a long time with appropriate care. The warming surface and high-grade, long-life stainless chafing dishes allow for an attractive alternative for keeping appetizers and other foods

2

Initial Use:

Heat the warming base without foods on it for approximately 10 minutes at maximum setting in order to seal the special coating. Temporary smoking is normal during initial use.

Subsequent Use:

1.The heating element is equipped with a variable thermostat knob. Heat range is from 1550 to 2000 F, to keep foods at serving temperatures. For best results, use maximum heat setting to quickly reach your desired temperature, then adjust to desired temperature. Set heat level by turning the knob so that the desired knob mark (0=OFF,1, 2, 3) lines up with the signal light line.

2.The light will come on only during heat cycle. Due to the low wattage necessary for warming trays, it can be 20-30 minutes before the light cycles off.

3.You may use the unit either fully assembled with chafing dishes, (Figure A) or use the warming base alone as a warming tray (Figure B).

4.If using chafing dishes, place the chafing dish holder(s) on the warming base before placing the chafing dishes in place.

5.The unit comes with the following stainless chafing dishes: Model NBS-3SP:

three 2.6 quart pans; Model NBS-2SP: two 4.3 quart pans; Model NBS-3SLP:

one 2.6 quart & two 4.3 quart pans; Model NBS-5SP: three 2.6 quart & two 4.3 quart pans . Each 2.6 quart pan will hold about 20 four ounce servings; the 4.3 quart pans each hold over 30 four ounce servings. The clear polypropylene lids have utensil slots.

3