Overland Storage REO 9000 with ProtectionPAC Software

Setting the Time and Date Information

The REO Appliance is originally set to use the time that corresponds to the Pacific time zone. If you are setting up the REO Appliance in a different time zone, you need to update the time and date settings accordingly. This ensures that any communication that occurs (for example, if an e-mail is automatically generated) reflects the correct date and time.

1In the right pane, scroll down below the E-mail Notification section to locate the Set Time section.

2Select the applicable settings, and click Submit.

3After you complete these configuration steps for the management system, proceed to the configuration steps outlined in Configuring the Systems Involved in the Backup Process on page 61.

60 X Configuring the Management System

Page 59 Page 61
Page 60
Image 60
Overland Storage REO 9000 setup guide Setting the Time and Date Information
Page 59 Page 61
Top Page Image Contents