Overland Storage REO 9000 with ProtectionPAC Software
To establish communication
1Install the desired software initiator or storage adapter.
Note: For detailed information on various drivers and adapters, see the manufacturer’s documentation for assistance on assigning targets (REO Devices). You can also check the Overland Web site (www.overlandstorage.com) for the applicable Application Notes.
2Repeat these steps for each system that will access storage on the REO Appliance.
3After you complete these configuration steps, choose one of the following:
If you want to use the default volume configuration of RAID 5 with logical volumes, proceed to the steps outlined in Creating Logical Volumes on page 71.
If you want to use a different configuration, proceed to the steps outlined in Changing the Volume Configuration on page 63.
62 X Configuring the Systems Involved in the Backup Process
