Overland Storage REO 9000 setup guide Setup Guide

Setup Guide

6From the REO Device ID list, select the ID for the target to which you are assigning this initiator.

7Click Submit.

8Repeat step 3 through step 7 for each target.

Configuring the iSCSI Initiator with

Target (REO Device) and Initiator Assignments

XOn each applicable server, use the management tool that came with your iSCSI initiator to specify the target (REO Device) information.

To configure the REO Appliance as a backup-and-recovery-acceleration appliance, you must provide target (REO Device) and initiator (host) information. An iSCSI name (for iSCSI) or a set of WWNN and WWPN names (for FC) is required for both the targets and the initiators. After targets and initiators have been specified, they must be assigned to each other. This must be performed on the server by using the software or hardware initiator, and on the REO Appliance by using the REO Appliance console, which you completed in the previous section.

Note: For detailed information on various drivers and adapters, see the

manufacturer’s documentation for assistance on assigning targets. You can also check the Overland Web site (www.overlandstorage.com) for the applicable Application Notes.

Configuring Targets (REO Devices and External Devices) and Initiators W 95