Setup Guide
Editing the Configuration File
(for a non-DHCP or UNIX Management System)
1With the key still inserted into a USB port on a Windows 2000, 2003, or XP system that contains active virus-protection software, browse to the software-key disk drive.
2Open the ipkey folder, and locate the ifcfg-eth0file.
The ifcfg-eth0 is the configuration file for the Management Port on the REO Appliance.
Open the ipkey folder, right-click ifcfg-eth0, and click Properties.
3Right-click the ifcfg-eth0file, and click Properties.
4On the General tab, if the Read-onlycheck box is selected, clear it, and then click OK; otherwise, click Cancel.
5Right-click the ifcfg-eth0file again, click Open With, and then select WordPad (or a comparable text editor).
Tip: Overland Storage recommends that you use WordPad, because it displays the configuration information in an easy-to-use format.
Editing the Configuration File (for a non-DHCP or UNIX Management System) W 33
