Setup Guide
2From the REO Device ID list, select the first device whose configuration you want to change.
Select a device. 
3In the Device Type section, select Tape.
4If you want to maximize backup storage capacity, select the Enable Tape Compression check box (for optimal backup performance, leave the check box cleared).
5To change the default target name of a device, in the iSCSI Target Name box, type the new name (for example, LTO7).
Important: The target names must be unique within a network. If you
are using multiple appliances, you must change the default target names. For more information, see Expanding Storage Capacity (Scalability) on page 107.
Type a new name (if desired), and then click Submit.
6To save your changes, click Submit (or click Reset to cancel).
Creating Tape Devices W 75
