Minolta Essential Instructions for Operating the PS7000 Scanner

5-3

Turning the Scanner ON and OFF

Turning on

1	Check that the Scanner is connected
	to the personal computer with the

interface cable and turn the Scanner’s power switch on (“” position).

NOTE

Turn the scanner on before turning on the personal computer.

Chapter 5

2	[Welcome to PS7000. Initializing]
	appears on the display and the start

key turns red. The Scanner can be operated when the start key turns green.

Start key

Operation

NOTE

When the SCSI cable is not connected properly, Images cannot be loaded if the PC interface cable is not connected properly.

When the message [Start Appli./Driver] appears on the display, turn the personal computer on and start the Driver. Refer to “Start-up” on page 3-7, or 4-5 for details on starting the Driver.

When the message [Printer is OFF. Turn Printer ON] appears on the display, change the [Connect] setting in [Initial] to [PC] in Utility mode. Refer to page 5-47 for details.