
Installation
The PS7000 Twain Driver (hereinafter referred to as the Driver) must be installed on the personal computer connected to the Scanner to read images from it. This chapter describes the system requirements of the personal computer and the installation procedures of the Driver. Moreover, please read the Readme.txt file in the floppy disk of Twain Driver.
System environment
The following are the minimum system requirements for the computer connected to the Scanner to install the Driver.
|
| Computer | Compatible with IBM PC/AT |
3 |
| ||
|
|
| |
Chapter |
|
|
|
| OS | WindowsNT4.0, Windows95, Windows98 | |
|
| ||
|
|
|
|
|
| Required memory | Grayscale Scan: |
|
|
| Max. 68 MB or less for the Twain driver only |
|
|
| |
Driver |
|
| Binary Scan: |
|
| Max. 10MB or less for the Twain driver only | |
|
|
| |
Twain |
|
| (additional memory required for the OS and other |
|
| applications) | |
|
|
| |
|
|
|
|
PS7000 |
| Application software | Application software compatible with Twain32 |
|
| ||
|
|
| |
| Recommended SCSI | SCSI Host Adapter manufactured by Adaptec | |
|
| Host Adapter | |
|
|
|
|
The operator should be completely familiar with basic Windows operations.
NOTE
Before installing PS7000 Twain Driver, install Adaptec Aspi Ver. 4.6 or advanced in your PC. If Adaptec Aspi is older than Ver. 4.6, PS7000Twain driver will not work.
Adaptec Aspi is not supplied together with the product.
Obtain the [Windows 95/98/NT 4.0 ASPI32.EXE] file from [update of Windows 95/98/NT 4.0