Menu flow chart
Pressing the keys on the control panel displays the corresponding menus as shown below.
User Mode 
Save Data
Up to three programs of customized settings can be registered.
Book Sheet
Select Book mode when scanning the thick original (book), and Sheet mode when scanning a
Cent Eras
The shadow generated in the center of the open book is masked. [Auto Set] can be selected in Book mode to detect the center of the original. The center of the original is regarded as the center of the book table when [Cent Set] is selected. The shadow masking width can be set from 2.5 to 20 mm (in 2.5 mm increments).
Output
Select an external device (printer or personal computer) to be connected to the Scanner.
Previous
NO.1
NO.2
NO.3
OK
Book mode
Sheet mode
OK
Auto set
Cent set
+2.5 mm Wide
OK
PC
Printer
OK
Confirm
Previous
OK
(In Book mode: Set the original distance.)
(In Sheet mode: Set the original height.)
(Available only in Book mode)
Operation Chapter 5
Job Recall
Recalls the customized settings previously registered using [Program].
Mode Check
* Select [OK] to return to the main menu.
NO.1
NO.2
NO.3
Previous
Displays the current settings for the Scanner.
Previous
