Book/Sheet modes
Sheet mode
Select this mode if an error message appears or a clear image cannot be obtained in Book mode, or when scanning thin materials (newspapers, photographs, documents, etc.) or a solid surface other than a book.
NOTE
Text is selected for the Image mode by default. It is recommended that this be changed to Photo when scanning photographs.
Chapter 5
When Sheet mode is selected, the focal point can be set to be within a range from 0 to 50 mm above the book table in 6 steps in 10 mm increments. When scanning a solid surface, adjust the original (solid surface) height in Sheet mode.
0 to 50 mm |
Operation
Cancel of the Auto function
In the Sheet mode, the scan time can be shortened by disabling the preliminary scanning for auto detection. Set each function as follows to cancel the Auto function.
•Expo (Manual)
•Zoom (Fixed magnification)
•Cent Eras (OFF)
•Masking (OFF)
•Fing Mask (OFF)
•Centerin (OFF)
•Org. type (Normal or Glossy)
