Maintenance
The following daily checks and cleaning are required to ensure the best possible performance and utmost safety from the Scanner.
Daily checks
1.Any of the following conditions could damage the Scanner or other electrical equip- ment. Move the Scanner immediately and eliminate the possible cause of malfunction.
•The Scanner is placed on the power cord or other cables.
•The Scanner is placed on any cord of other electrical devices.
2.If any of the following conditions is found, turn the Scanner off immediately, unplug the power cord from the outlet, and call your authorized dealer.
•The power cord or interface cable is damaged.
•The insulation of the power cord is damaged and the bare wires are exposed.
Maintenance Chapter 7
Cleaning
Scanner glass and illumination glass
The Scanner may not scan the original correctly if the scanner glass or illumination glass is dirty. Wipe the surfaces with a dry soft cloth to remove dirt.
Steel mirror and shading plate
The height of the original is not correctly measured if the steel mirror or shading plate is dirty, resulting in a warning message. Wipe the surfaces with a dry soft cloth to remove dirt.
Scanner glass
Illumination glass
Shading plate
Steel mirror
NOTE
Be sure to turn the Scanner off and unplug the power cord before cleaning.
