Minolta PS7000 manual Desk drive

Check that the Scanner is connected to the personal computer.

4-2

Installation

Installation procedure

Follow the procedure below to install the Driver.

*Screens may differ slightly depending on the Windows version.

1

2 Turn on the power switch of the Scanner (refer to “Turning on” on page 5-3), and then turn the personal computer on to start Windows.

[When using Windows95]

Select [Driver from disk provided by hardware manufacturer] and click the [OK] button when the following screen appears.

	The screen shown below appears.
	Insert the ISIS Driver floppy disk into
	the floppy disk drive (generally drive
	“A”) of the personal computer and
	click the [OK] button.
3	After window’s has started, set the ISIS Driver floppy disk into the computer’s floppy
	desk drive.
4	Click the [Start] button and select
	[Run…].

PS7000 ISIS Driver Chapter 4