Minolta PS7000 manual Image acquisition screen

		4-8
		Image acquisition screen
1.	Dot per inch:	Set the resolution of the image output.
		Refer to “Selecting resolution” on page 5-38 for details.
2.	Paper Size:	Set the size of the original to be read.
		Refer to “Selecting scan size” on page 5-39 for details.
3.	Brightness:	Select [Automatic] or [Manual].
		Brightness is adjusted manually when [Manual] is selected.
4.	OK:	Validates the settings.
5.	Default:	Initializes all the set values.
6.	Cancel:	Exit the image acquisition screen.
7.	Scan Mode:	Select [Spread] (scanning both pages), [Single] (scanning
		either right or left page only), or [Book Split] (scanning right
		and left pages separately).
		Refer to “7. Page key” on page 2-8 for details.
8.	Frame Masking:	Objects outside the original are erased to prevent a
		shadowed (black) frame being created in the image, i.e.
		when the paper selection is larger than the original.
		This function is effective only in Book mode.
		Refer to “Frame Masking (Masking)” on page 5-32 for
		details.
9.	Finger Masking:	The image of the fingers holding the original is removed
		from the scanned image. This function is effective when
		[Frame Masking] is selected in Book mode.
		Refer to “Finger Masking (Fing Mask)” on page 5-33 for
		details.
10.	Centering:	Any shift away from the center of the original is corrected
		and the scanned image is placed in the center of the screen.
		This function is effective when [Frame Masking] is selected
		in Book mode.
		Refer to “Centering (Centerin)” on page 5-35 for details.
11.	Center-line Erase:	The shadow generated in the center of the open book is
		erased during scanning.
		[Automatic Detection] automatically determines the center

of the original. This is effective only in Book mode. The center of the book table is regarded as the center of original when [Center Fixed] is selected.

The erasing range (width) can also be adjusted.

Refer to “Center Erase (Cent Erase)” on page 5-31 for details.

PS7000 ISIS Driver Chapter 4