Lamp status
Half intensity
The Scanner’s lamp lights at half intensity when any key is pressed to select menus, etc. The lamp goes out when no key is pressed for the preset time*. The fan cooling the lamp is turned off one minute after the lamp has gone out.
* The
Full intensity
The Scanner’s lamp lights at full intensity when the Scanner is reading the original. The lamp returns to half intensity after scanning is completed.
NOTE
The halogen lamp used in the Scanner is safe and not hazardous to health. However, never look directly at the lamp when lit. Looking directly at the lamp when lit may result in eye damage. When the Scanner is operated for a long time, we recommend you take a 5 minute break every hour to rest your eyes.
Operation Chapter 5
