Earthquake Sound IQ-52W Installation, Precautions, Speaker Wire Connections, Connecting to iPod

Installation

For optimal performance of the IQ-52, please read the following directions carefully before installation.

Precautions

Connections: Connect the RCA outputs of your IQ-52 to the corresponding computer sound card, portable music player, or other audio device. We recommend that you use the supplied cables (or cables of equal or higher quality) for all connections. Be sure that the IQ-52 is powered off before making any connections.

Correct Power Operation: Since the IQ-52 contains amplifiers, it must be connected to a power outlet using the detachable AC cable that is provided. Before connecting power, please make sure that the On/Off switch to the off position.

WARNING! – Use of improper Voltage may result in hazardous conditions and/or damage to speaker components not covered by speaker warranty.

Speaker Wire Connections

Use 3 meter 1/4” TS to 1/4” TS speaker cable included in the IQ-52 package to connect the left and right speakers via the 1/4” TS jacks on the back of each speaker.

Connecting to a Computer Sound Card or Other Audio Output Device

Before connecting the IQ-52 Powered Speaker System, make sure the power from the computer or other output device has been turned off and the IQ-52 system is also turned off.

Plug the RCA cable to the corresponding output connectors of a computer sound card, portable music player, etc. You can also use the 1/8” stereo mini cable to connect a secondary audio device to the AUX input.

Connecting to iPod®

iPod® Universal Dock Adapters: Plays & Charges for your iPod®

Universal Dock Adaptor compatible for iPod®s: 4pcs, the number (8-11)

I. 8#. iPod nano® 2GB 4GB II. 9#. iPod® with video 30GB

III.10#. iPod® with video 60GB 80GB IV. 11#. New iPod nano® 2GB 4GB 8GB

10 www.earthquakesound.com