Minolta PS7000 manual Initial settings, Ial, Operations in Utility mode

5-48

Operations in Utility mode

Initial settings

The initial settings (settings on the panel and the connected device) are customized and/or reset to the default factory settings. If any of the initial settings is changed, turn off the power to the Scanner. Then, turn it on, and the initial settings have been changed accordingly.

1	Select [Initial] on the main Utility
	screen. The initial setting screen

appears.

2	Select the desired item. The specified
	menu name is highlighted.

Select [Previous] to return to the main Utility screen.

3 Select [Pnl set] to check and make -1the current settings the default settings for the current and

subsequent operations.

Select [Set cfm] to check the current settings.

Select [Previous] to return to the previous screen.

Select Function
Init	Time	Caut	SCSI	Main
ial	set	ion	set	Menu

Enable Default Settings
Pnl	Conn	Re	Prev
set	ect	set	ious
			Chapter 5

Save Default Panel Settings			Operation
Set	Prev	OK
cfm	ious

Select [OK] to define the current settings as the default settings for the current and subsequent operations.