Installation procedure

Check that the Scanner is connected to the personal computer.

3-2

Installation

Follow the procedure below to install the Driver.

*Screens may differ slightly depending on the Windows version.

2 Turn on the power switch of the Scanner (refer to “Turning on” on page 5-3), and then turn the personal computer on to start Windows.

[When using Windows95]

Select [Driver from disk provided by hardware manufacturer] and click the [OK] button when the following screen appears.

	The screen shown below appears.
	Insert the Twain Driver floppy disk
	into the floppy disk drive (generally
	drive “A”) of the personal computer
	and click the [OK] button.
3	After window’s has started, set the Twain Driver floppy disk into the computer’s
3	floppy desk drive.
4	Click the [Start] button and select
4	[Settings] → [Control Panel].

PS7000 Twain Driver Chapter 3