Zoneline Installation

GE Appliances

AZ22E09D*P - GE Zoneline Dry Air 25 Series Cooling and Electric Heat Unit

Wall Case Dimensions

Maximum Cord Extension (in inches)

Electrical Wiring

All wiring, including installation of receptacle, must be made in accordance with local electrical codes and regulations.

RAB71 Insulated Wall Case

Heavy-gauge galvanized steel, with insulation. A-42", B-13-3/4", C-16"

RAB77 Wall Case

Molded SMC fiberglass-reinforced polyester compound. A-42-1/8", B-13-7/8", C-16-1/4"

Wall Opening Dimensions

Add 1/4" to A and C dimensions for all cut-out size.

RAB71A = 20-7/8

RAB77A = 21 7-1/8

SIDE

VIEW

Inside

Room

Cabinet

Inside

Grille

RAB71A = 16 RAB77A = 16-1/4

Outside

Note: Aluminum wiring may pose special problems—consult a qualified electrician.

Resistance Heat

Resistance heat or back-up heat determined by Quick Connect power cord on the Premium Series and selected heater size for the Value Series (15 amp. 8,600 BTU, 20 amp. 11,700 BTU and 30 amp. 17,000 BTU @ 230 volt).

Grille Options

Stamped Aluminum Grille—RAG60

Molded Exterior Architectural Louvers (Cycoloy)

RAG61 or RAG64	(Beige)	RAG63 or RAG66 (Bittersweet)
RAG62 or RAG65	(Maple)	RAG67 (Extruded Aluminum)

Ducted Applications

2200 and 3200 series can be used with ductwork to heat or cool more than one room. RAK605 Duct Adaptor is applied to top of case over air discharge/RAK601 Duct Extension is applied to right or left of adaptor. Locally fabricated ductwork may be added to extend to maximum recommended distance of 15 feet.

Electrical Connection

230/208 volt units may be plugged into a receptacle. 265 volt units and special application 230/208 volt units require direct connection. See Architects and Engineers Design Data Manual for electrical connection information including use of sub-base for direct connected units. Installation must comply with local electrical codes and regulations.

Simple Three-Step Installation

Zoneline heat pumps and heat/cool units are designed for easy installation, off or flush with the floor. When the SMC fiberglass-reinforced polyester sleeve is installed, the chassis simply slides into place.

Compatibility with existing Zoneline wall cases and rear grilles simplifies retrofit installations. A new chassis simply slides into the already installed wall case; the existing rear grille may be used as is, or with a minor modification for greater operating efficiency.

1.Frame the Opening. The RAB77A SMC wall case requires an opening of 16-1/2" high x 42-3/8" wide. Position the sleeve, secure it to the studs and then caulk. Complete instructions are furnished with each unit.

2.Connect the Electrical Supply. Each Zoneline unit requires a 230/208V power supply. It is strongly recommended that electrical connections be made by a qualified electrician. All wiring, including installation of the receptacle, must be in accordance with local codes.

3.Slide In Chassis. With the wall sleeve, electrical receptacle, and exterior grille in place, the separate chassis simply slides into position. Install the roomside cabinet, and plug into the electrical receptacle. You are now ready for many years of quiet comfort.

	For answers to your Monogram,®GE Profile Performance Series,™ GE Profile,™ and
Created 3/99	GE appliance questions, call GE Answer Center® service, 800.626.2000.

AZ22E09D*P specifications

The GE AZ22E09D*P is a robust and efficient air conditioning unit that is designed to provide optimal cooling performance for residential spaces. This model boasts various innovative features and technologies, making it an excellent choice for homeowners seeking comfort and efficiency.

One of the prominent characteristics of the GE AZ22E09D*P is its impressive cooling capacity. With a rating of 9,000 BTU, this system is capable of cooling spaces of up to 400 square feet, making it suitable for medium-sized rooms. It operates in a range of conditions, ensuring that indoor environments remain comfortable even during the hottest days of summer.

Energy efficiency is a key focus of the GE AZ22E09D*P, as evidenced by its high Seasonal Energy Efficiency Ratio (SEER) rating. This efficiency translates into lower energy bills and a reduced environmental footprint, making it an environmentally friendly choice for consumers. The unit uses advanced multi-speed fan technology, allowing users to adjust the airflow according to their needs, further enhancing comfort and efficiency.

The cooling system incorporates modern refrigerant technology, utilizing R-410A refrigerant, which is known for its environmental benefits compared to older refrigerants. It has a lower impact on ozone depletion, aligning with current environmental standards.

One of the standout features of the GE AZ22E09D*P is its user-friendly digital thermostat. This allows homeowners to easily set and maintain their desired indoor temperature, ensuring consistent comfort throughout the day and night. Additionally, the unit is designed with an easy-to-clean filter, which helps to maintain air quality and prolong the life of the system.

The installation process is designed to be straightforward, with comprehensive instructions provided to facilitate DIY installation. The compact design of the unit allows for flexible placement, making it suitable for various room layouts.

In terms of noise levels, the GE AZ22E09D*P operates quietly, contributing to a peaceful indoor environment. This aspect, combined with its effective cooling capabilities and energy efficiency, makes it a desirable choice for those seeking a reliable air conditioning solution.

Overall, the GE AZ22E09D*P embodies a perfect combination of advanced technology, user convenience, and environmentally friendly operation, making it a smart investment for any homeowner looking to enhance their indoor comfort.