Head Maintenance (con’t)
Test Print
You can print the nozzle test pattern through the operation panel.
This is performed to check for clogged nozzles.
Procedures
1.Press the Menu mode button.
2.Press the button associated with the TEST PRINT option to enter the test print mode.
<MENU>S TEST PRINT Î HEAD MAINTENANCE Î 
<MORE>
<TEST PRINT> | S |
NOZZLE TEST Î
<MORE>
<NOZZLE TEST> | S |
* W/O INFO. | + |
FRONT | - |
<ROLL> | PRINT Î |
|
|
3.Press the button associated with the NOZZLE TEST option.
4.Use the arrow buttons to select the FRONT or REAR roll.
4.Press the button associated with the PRINT option to execute the print.
6.Verify that the adjustment was successful. If not, repeat the process. If this still does not resolve the problem, call your service representative.
Maintaining Print Quality | 39 |
