Loading and removing media (con’t)
Loading media in the printer (con’t)
3.Turn the locking knob on the media end cap to its locked position to secure it in the media roll.
4.Repeat steps 2 and 3 for the opposite end of the media roll.
5.Open the printer’s top cover.
6.Set the new media roll on the printer.
7.Media width guides are provided on the printer’s media roll feeder.
Set position | Media Size |
|
|
First position | 54 inches (1372 mm) |
|
|
Second position | 50 inches (1270 mm) |
|
|
Third position | 42 inches (1067 mm) |
|
|
Fourth position | 36 inches (914 mm) |
|
|
Fifth position | 23.4 inches (594 mm) / 11" (279 mm) |
|
|
8.Set the right end cap at the position matching the media width. The front guides are
9.Rotate the media end cap to unroll 3 to 4 inches of media from the roll.
10.Insert the leading edge into the feeder’s media input.
Caution - Media rolls, particularly the larger widths, are heavy and awkward to handle. Ask for assistance when installing these media rolls to avoid personal injury, damage to the printer or damage to the media.
Supplies | 33 |
