Operating the cutter (con’t)
Replacing cutter blade
The procedures to replace the cutter blade are:
Procedures
Platen guide 1
2
3
1.At the printer’s operations panel, press the Menu button (top button) to enter menu mode.
2.Use the arrow buttons to scroll to Replacing Blade and press the associated button to proceed.
3.The operation panel will display: "Move to the center". Press the associated button to move the cutter blade to the center.
4.The operation panel will display: "Open top/front cover". Open the top cover. After opening the top cover, the panel will again instruct to open the front cover.
5.Open the top cover and then press the button associated with NEXT.
6.Manually move the cutter blade to the very center if not properly centered.
7.The operation panel will display: "Replace blade and press reset".
8.To remove the cutter, push down the cutter blade.
24 | Operations |
