Setup Guide
9Slide the REO Appliance into the rack, and attach the captive screw on each panel extension (left and right sides) to the rack and nut plate.
REO90006
Installing the Disk Carriers and Disk Drives
The disk carriers, which contain the disk drives, are packaged separately, which allows you to insert them into the chassis after you have installed the chassis in the rack.
1Remove the package of desiccant from each slot in the chassis.
2Insert the first disk carrier in to the applicable slot in the chassis.
3Close the disk carrier by doing the following:
a Make sure that the lever is in its fully extended, open position. b Press the right side of the carrier into the slot.
c Press the lever in. Pressing the lever in draws the carrier fully into the slot and locks it in place.
0 | 1 | 2 | 3 |
4 | 5 | 6 | 7 |
8 | 9 | 10 | 11 |
12 | 13 | 14 | 15 |
16 | 17 | 18 | 19 |
20 | 21 | 22 | 23 |
4Repeat these steps for each disk carrier.
5Attach the appliance
Installing the Disk Carriers and Disk Drives W 25
