Setup Guide
Select slots in the mounting brackets so that the length of the assembly equals the distance between the front and rear rails of the rack.
Nut Plate
REO90063
Note: When fastening the adjustable bracket, allow room for the slide to pass by the inside of the rack.
4Tighten all the screws.
5If they are not already locked in the extended position, pull the intermediate slides toward the front (out of the rack) so that they lock in the extended position.
REO0065
Caution: The disk drives for the REO Appliance are located in the front of the unit. The result being the majority of weight is distributed to the front of the REO Appliance. This next step should be performed by at least two people, or by using a mechanical lift. Make certain that when the REO Appliance is fully extended that a force of 20% of the rack’s weight, but not more than lb. (Kg), applied in any direction other than upwards, does not cause the rack to overbalance.
Positioning the REO Appliance in a Rack W 23
