Setup Guide
Re-Creating a Hot Spare (RAID 5 With Hot Spares)
When an issue arises with a disk in a RAID 5 configuration and you are using hot spares, the disk in question moves to the FREE DRIVE POOL section, and the system automatically begins a rebuild process by using the disk initially designated as a hot spare.
The questionable disk remains in the FREE DRIVE POOL section and is assigned a Hot Spare button. To determine if the questionable disk needs to be replaced, you can use it to
A rebuild begins with the hot spare replacing the 
questionable disk.
This disk displays a
Hot Spare button.
To test the disk by creating a hot spare
1Make sure that none of the initiators (servers) have active connections with the REO Appliance.
Determining Whether a Disk Drive is Faulty or There is a Problem with the REO Appliance W 141
