4
CHAPTER
Configuring the Management
System
The main steps involved in configuring the management system include:
Step 1 Establishing communication with the REO Appliance by mapping it to a drive letter (Windows only).
Step 2 Verifying that the gateway and Management Port information are correct.
Step 3 Entering the GbE Data Port, Fibre Channel, and system information. Step 4 Setting up your logon information.
Step 5 Configuring
Step 6 Setting the applicable time zone information.
The images shown in the following sections might appear slightly different if you are using a different browser or a
Mapping a Network Drive to the REO Appliance (Windows Only)
To access the components used for installation and configuration of the REO Appliance, you must map a network drive from the REO Appliance to the system that will operate the REO Appliance console.
1Make sure that REO SoftKey is still inserted in a USB port on the REO Appliance.
2
Configuring the Management System W 39