Setup Guide
2To change an iSCSI Target Name, type the new name in the text box, and then click Submit.
To change a target’s name, type the new name in this box, and then click Submit.
3From the REO Device ID list, select the device for which you want to add initiators, and then click Add New Initiators.
Select the device,
and then click Add
New Initiators.
4If you are working with iSCSI, do the following:
a In the Connection Type section, make sure that iSCSI is selected (this is the default).
b In the iSCSI Initiator Name box, enter a unique name (up to 223 alphabetical or numerical characters) of an authorized initiator for the target.
The fully qualified iSCSI name is assigned by the manufacturer of either the software initiator or the storage adapter installed on your backup server.
Configuring Targets (REO Devices and External Devices) and Initiators W 93
